|
ProGreen
Putting Green Turf
(888) 440-7888
ProGreen has been an innovator of
artificial putting surfaces for over 20 years: We were the first artificial
grass company on the
Golf Channel. We were also the first to develop a green-colored top dressing
sand, the first to make a PVC cup support system, and the first to design a
stable backing for nylon putting surfaces. We have putting surfaces for Putting
Greens, Portable (or permanent) Modular Greens, Miniature Golf, Par 3 Courses, Putting Courses, and Tee
Lines/Hitting Mats.
Call us today for your free quote and
product samples at (888) 440-7888.
Click here to view the Golf Turf Photo Gallery.
Click Here to Read About Which Type of Putting Green Surface is Best for You
Click on
Pictures or Product Name for More Details. Products that start with "PGN"
have nylon yarn, and products that start with "PG" have yarn made of
polypropylene.
|
 |
PG Augusta
Install over aggregate base (finely crushed stone),
chip from up to 40 yards out
(3 lbs. of infill sand required.)
OR
glue
over concrete or
modular surface
(when glued no infill is
required, but you can only chip from 10 yards out.) |
|
 |
PGN Tournament
Install over aggregate base
(finely crushed stone),
chip from up to 20 yards out
(2 lbs. of infill sand required.)
OR
glue
over concrete or
modular surface
(when glued no infill is
required, but you can only chip from 10 yards out.) |
|
 |
PGN Tournament
Plus
Install over aggregate base
(finely crushed stone),
chip from up to 40 yards out
(3 lbs. of infill sand required.)
OR glue
over concrete or
modular surface
(when glued no infill is
required, but you can only chip from 10 yards out.) |
|
 |
PG 1000
Install over aggregate base
(finely crushed stone), chip from
up to
30 yards out
(2.5 lbs. of silica sand required.) |
|
 |
PG 2500
Install over aggregate base (finely crushed stone),
chip from up to 40 yards out
(silica sand and fine crumb rubber required, talk to a ProGreen representative
for details.) |
|
 |
PG 4000
Install over aggregate base (finely crushed stone),
chip from up to 150 yards out!
(silica sand and fine crumb rubber required, talk to a ProGreen representative
for details.) |
|
 |
PG Recreation Putt
Glue to a concrete surface or
a modular surface. Great for miniature golf. More durable than PG
Patio Turf. |
|
 |
PG Patio Turf
Glue to a concrete surface or
a modular surface. Great for miniature golf. This is our
entry-level miniature golf turf. |
|
ProGreen
Hitting Line Turf
[ View Site Map ]
|
How To Calculate Cost Based on Total Square Footage |
 |
|
To calculate the
total cost for turf multiply the total square footage of turf needed by the
dollar amount. Square footage is determined by multiplying the Width by the
Height of the area to be covered in turf (see diagram at right). Keep in
mind that some of our golf turfs are 12 feet wide instead of 15 feet wide.
Example: 600 square feet at $4.50 per sq. ft. will
cost $2,700
(600 x 4.50 = 2,700) |
|
NOTE: The turf is delivered in rolls, similar
to carpet rolls. All other accessories are shipped separately from
the rolls of turf. Turf delivery drivers are
3rd party contactors and ARE NOT REQUIRED to help unload or move rolls of
turf. Some drivers don't mind assisting in pulling the turf off the truck,
but DON'T COUNT ON IT! We recommend that you have 2 people available upon
turf delivery for roll sizes less than 15' x 30' and additional bodies for
rolls bigger than that.
|
Click Here for Information on
ProGreen Modular Putting Greens
[ View Site Map ]
|
| |
|
